Connecting methods:
This controller has six fuses, including two red and two black
lines; yellow and green is respectively one line.
Wiring:
Confirming the rated voltage battery is 6V / 12V / 24V
Confirming solar panels working voltage is 24V 6V / 12V /
The first step is to connect battery: battery anode (red) and
negative (black) is respectively connected any red or black line of
controller .Notice that don't connect reversed lines otherwise the
controller cannot work. Don’t enter the next step until confirm the
first step is correct.
The second step is to connect solar panels: the positive and
negative of solar panels are respectively connected with the yellow
line and a black line of the controller. Please notice don’t
connect it reversed otherwise it will damage your controller.
The Third step is to connect load: the positive and negative of
head lamp is respectively connected a (any) red line and green line
of the controller. Attention that don’t connect it reversed
otherwise it may damage your lights.
After wiring, the controller is automatically put into use.
Notice:
Confirm the solar panels and battery voltage is 6V /.12V /24V
Don’t make the positive and negative ends of the battery in
short-circuit.
Don’t connect the positive and negative ends of the battery
reversed
Don’t make the positive and negative ends of the floodlight in
short-circuit.
Don’t wire the positive and negative of the solar battery reversed
Technical Parameters：
Model | WS－L0606 | WS－L1206 | WS－L2406 |
System voltage | 6V | 12V | 24V |
Max charge current | |
